Ransomes 36 HYDRO Z-CONTROL MID-16HP KAW REAR DISCHARGESELF PROPELLED WALK BEHIND MOWER Operator's Manual download pdf (Page 24)

Hydro

Midsize

BELT REPLACEMENT

CUTTERDECK BELT

1. Remove PTO belt.

2. Rotate idler arm using a 3/8" ratchet or breaker

bar and remove belt.

3. Replace in the reverse order.

PUMP-DRIVE BELT

1. Remove PTO belt from the engine clutch.

2. Disconnect the clutch wire harness.

3. Unbolt clutch bracket from clutch and rotate the

clutch to allow enough clearance to remove the

clutch bracket.

4. Rotate idler arm using a 3/8" ratchet or breaker

bar inserted into the square hole in the idler arm.

5. Remove pump-drive belt.

6. Replace by following steps in reverse order.

PTO BELT

1. Rotate idler arm using a 3/8" ratchet or breaker

bar and remove belt.

View under engine deck

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

No comments

Ransomes 36 HYDRO Z-CONTROL MID-16HP KAW REAR DISCHARGESELF PROPELLED WALK BEHIND MOWER Operator's Manual Page 24